SCHAEFER offers excellent service and this comprises, apart from the product itself, always the matching software. Modules like WS-TAB for example simplify complicated ordering processes and of course the planning of respective projects and make the costs transparent. Also helpful: The software GUIDE, the configuration accessory for our products.

Service hotline: +49 7571 722-51.

Software GUIDE


The software GUIDE is the accessory for the configuration of SCHAEFER-products. With purchasing a product the customer gets GUIDE (including license key) and can install the corresponding components. Updates are continually posted on the homepage and can be downloaded and installed.

Questions and wishes are welcome via our service hotline +49 7571 722-51.

Configurator  /  Product DMD 27/30/
35/50,
DMD 16x16
MFD
332/544
LCD
240
Touch
TFT 7"
TFT
3.5"/5"/
7" F
TFT
3.2
TFT
480/640/
800
TFT
10.4"
DVM 70,
DVM 70 V2
RB,
PS
SP-Bus-Node,
SP-Bus-Car-Node
CAN CN16,
CS08, CA16
SCHAEFER CONFIGURATOR                        
  Layout configuration x x x x x x x x        
  Device configuration x x   x x   x   x x x  
TFT WIZARD                        
  Layout configuration           x   x        
  Device configuration           x   x        
TFT CONFIGURATOR                        
  Layout configuration             x          
  Device configuration             x          
LCD CONFIGURATOR                        
  Layout configuration     x                  
  Device configuration     x                  
CANwizard (Plugins)                       x

 

SCHAEFER Configurator

Software for configuration of DMD 27, DMD 30, DMD35, DMD 50, DMD 16x16, Touch TFT, TFT F, TFT 480, TFT 640, TFT 800, MFD, RB, PS, DVM, SP-Bus-Node, SP-Bus-Car-Node and LiftBoy
 


SCHAEFER Configurator (for Windows 10 or later)


System requirements

• x86- or x64-prozessor with min. 1 GHz 
• MS Windows 10 / Windows 11
• MS Net. Framework 4.5
• min. 8 GB RAM
• min. 1.1 GB free HDD memory
• Minimum screen resolution 1920 x 1080 Pixel
• MFD-PC-Interface
• DMD-PC-Interface
• DMD-PC-Interface for Windows 10 / Windows 11
• Cardreader for SD- Cards (microSD)
 

To run SCHAEFER Configurators you need MS .NET Framework 4.5.2: 

www.microsoft.com/de-de/download/details.aspx

Config Kit driver for Windows 10 / Windows 11


SCHAEFER Configurator for Windows XP


System requirements

• x86- or x64-prozessor with min. 1 GHz 
• MS Windows XP SP3  / Windows 7 / Windows 8 / Windows 8.1
• MS Net. Framework 4
• min. 1 GB RAM
• min. 250 MB free HDD memory
• Minimum screen resolution 1280 x 1024 Pixel
• MFD-PC-Interface
• DMD-PC-Interface
• DMD-PC-Interface fĂĽr Windows XP / Windows 7 / Windows 8
• Cardreader for SD-Cards (microSD)
 

To run SCHAEFER Configurators you need MS .NET Framework 4:

www.microsoft.com/de-de/download/details.aspx

Config Kit driver for Windows XP

CANwizard®-PlugIn

By means of this software including activeX-driving elements the configuration and error diagnosis of all components connected with the CAN-bus is done. The software contains special functions for the application profile CiA-417 for lifts.

 

Features

  • Configuration of all CANopen-products from SCHAEFER
  • Simple function tests of connected operating and indicating elements
  • Allocation of baud rates and node numbers with CANsmall
  • Support of automatic baud rate detection
  • Automatic scanning of CANopen-networks
  • Presentation of the network in a clear tree structure
  • Import of EDS-data
  • Automatic assignment of EDS-data to the devices
  • Terminal mode for display presentation in accordance with VT52
  • Software updates via the CAN-bus
  • PDO-mapping function
  • Clear and simple access on the device data (object directory)
  • Saving of all parameters in a project file
  • Recovery of parameters of a device or the whole network
  • Parameterisation in the device view possible without CANopen-know-how
  • Network management functions
  • Event monitor with presentation of DSP417-messages in clear text
  • LSS-services for configuration of node-IDs
  • Supports current CAN-adapters from Ixxat, Peak, Systec and Vector

System requirements:

  • MS Windows® XP/ Vista / 7 / 8 / 10
  • At least 1 GHz system tact as well as 128 MB RAM
  • Minimum screen resolution 1024 x 768 pixels
  • At least 10 MB free hard disk memory 
     

Accessories

  • CAN-dongle
  • CAN-Config-adapter
  • Remote transmission coupling in connection with NR-Line_CAN from Telegärtner Elektronik GmbH

Download

CANsmall CS 08 V 2.1.2 | Electronic Datasheet for CAN landing nodes

CANsmall CS 08 V 2.1.3 | Electronic Datasheet for CAN landing nodes

CANsmall CS 08 V 2.3.8 | Electronic Datasheet for CAN landing nodes

CANnode CN 16 V 2.2.0 | Electronic Datasheet for CAN car nodes

CANnode CN 16 V 2.3.7 | Electronic Datasheet for CAN car nodes

CANnode CN 16 V 2.3.8 | Electronic Datasheet for CAN car nodes

TFT 3.5" F C | Electronic Datasheet fĂĽr CAN-TFT

TFT 5" F SRT C | Electronic Datasheet fĂĽr CAN-TFT

​​​​​​​TFT 7" F SRT C | Electronic Datasheet fĂĽr CAN-TFT

CN 16-CANwizard-PlugIn | Configuration software for CANnode CN 16 (2.13 MB) (V. 2.3.2)

CS 08-CANwizard-PlugIn | Configuration software for CANsmall CS 08 (2.06 MB) (V. 2.3.2)

CN 16F-CANwizard-PlugIn | Configuration software for CANnode CN 16 F (6.64 MB) (V. 3.9.8)

CN 08F-CANwizard-PlugIn | Configuration software for CANnode CN 08 F (2.12 MB) (V. 3.9.8)

CANwizard (www.boehnke-partner.com)

LCD 240-CONFIGURATOR

Software for configuration of the display typ LCD 240 2HP/2HPC/2VP und LCD 240 2HS/2HSC/2VS

 

System requirements

  • MS Windows® 2000 SP4/XP
  • MS .NET Framework 2.0
  • 256 MB RAM
  • Minimum screen resolution 1024 x 766 pixels
  • CD-ROM drive
  • Vacant serial interface

 

Download

 LCD 240-2xx-Configurator 1.0.3 (5,5 MB) | Programming software for LCD 240-2xx

 User Manual LCD 240-Configurator (791 KB)

 User Manual LCD 240 (0,9 MB) 
 

For data that are deposited in ZIP-archives you need Windows XP or an extract program like e. g. WinZIP. For presentation of PDF-files you need Adobe Reader.

TFT-CONFIGURATOR

Software for configuration of the display types TFT 480 / TFT 640 / TFT 800.

 

System requirements

  • MS Windows® XP/ Vista / 7 / 8 / 10

  • MS .NET Framework 2.0
  • 256 MB RAM
  • Minimum screen resolution 1024 x 768 pixels
  • DVD-ROM drive
  • USB interface

Download

Important update information: In order to ensure a correct installation of the software we ask you to uninstall the previous version of the software TFT-Configurator prior to installing the new version.

TFT-Configurator (65 MB) | Software for configuration of TFT 480 / TFT 640 / TFT 800

Driver for Windows XP and Win7 (32 und 64 Bit) (5,2 MB)

To use the TFT-Configurator you need MS .NET Framework 2.0 Redistributable (x86).

For data that are deposited in ZIP-archives you need Windows® XP or an extract programme like e. g. WinZIP.

For presentation of PDF-files you need Adobe Reader.

TFT Wizard

Software to configure the displays TFT 3.2" and TFT 10.4"
 

System requirements

  • MS Windows® XP/ Vista / 7 / 8 / 10 / 11
  • MS .NET Framework 4.5
  • 2 GB RAM
  • Minimum resolution 1024 x 768 pixels
  • DVD-ROM drive
  • USB port
  • or

  • MS Windows® 10
  • MS .NET Framework 4.5
  • 2 GB RAM
  • Minimum resolution 1024 x 768 pixels
  • administrator privileges
  • DVD-ROM drive
  • SD card reader

Download

TFT Wizard (2.62 MB, zip)  15.10.2021 | Configurator TFT 3.2" and TFT 10.4"

Driver

WS-TAB – the do-it-yourself planning aid!


WS-TAB is the perfect way to plan and to order. Whether the planning is for a complete customised fixture or the ordering of single components: With WS-TAB SCHAEFER offers a competent tool to simplify complex ordering and planning of projects.

Of course, WS-TAB contains all of our company’s products, even the different design variants. It is Windows®-compatible, easy to use and does not involve additional training effort. In addition to the security of exact and complete ordering, the software also provides for clear cost transparency.


WS-TAB is free of cost, as well as its updates.
Call our service hotline +49 7571 722-51 or by e-mail to info@ws-schaefer.com

Our practice tip: We recommend working with only one version within the company. WS-TAB is saved in a directory which is accessible to every user and the care of updates is centralised. 

Our field service colleagues will gladly set appointments for schooling at your premises.

To Top